How do I safely perform fuel tank cleaning for small-scale engines?

Fuel Tank Cleaning Small Engine by Briggs and Stratton

Fuel tanks are designed to keep your engine's fuel clean, vented and secure on all lawn mowers, snow blowers and outdoor power products. If you spot debris in the gas tank or leaking gasoline, information technology's time for fuel tank maintenance. Never attempt to repair a damaged tank. It poses a take a chance of leakage, burn down or fuel contamination. If you're replacing a fuel tank, use only parts recommended past the engine manufacturer. These parts will attach securely to your engine in the space provided.

Many fuel tanks are designed to use a vented gas cap to forbid a vacuum from forming in the fuel line. If fuel is leaking from the cap, a properly fitted replacement cap tin can solve the trouble.

WARNING: Always read the engine and equipment manual(s) before starting, operating, or servicing your engine or equipment to avoid personal injury or property harm. Fuel and its vapors are extremely flammable and explosive. Always handle fuel with extreme intendance.:

Run into an authorized dealer or contact Briggs & Stratton if you lot are unsure of any procedure or have additional questions. Find all Engine Safety Warnings

Fuel Tank Parts

Fuel Tank Cleaning Small Engine by Briggs and Stratton

Fuel tanks must be synthetic of a not corrosive cloth or coated with a corrosion-resistant layer to protect against the dissentious effects of water, alcohol and common salt. If the tank is designed to evangelize fuel through a fuel line, a convex fuel filter may be located at the base of the tank, where fuel from the tank enters the fuel line. A filter tin can as well be located exterior the tank, midway along the fuel line.

If your tank must sustain excessive vibrations, you lot tin can install a labyrinth-equipped tank on some models. The labyrinth, available from your Briggs and Stratton Dealer, contains a set of baffles and/or a foam insert to reduce the sloshing and vaporization of fuel.

How to Clean a Fuel Tank in a Backyard Mower or Small Engine

i.Remove the spark plug lead and secure information technology away from the plug.
2.Use a fuel line clamp or other smoothen-faced clamp to seal the fuel line where it attaches to the carburetor. Then, disconnect the line from the carburetor, hold the line over a bucket or fuel tin and release the clench. Dispose of all fuel in a safe style.
3.Bank check with a flashlight for debris and beads of light that betoken holes or cracks. Use a baster to remove loose debris. If you lot find damage, supersede the tank with original manufacturer's equipment.
4.Inspect the fuel filter for droppings or deposits.
5.Reattach the fuel tank or install a new tank, fastening it firmly with the cap screws. This is a skillful opportunity to replace the fuel line and filter, using original manufacturer'southward equipment.

Service part numbers for the fuel tank are located in the small engine transmission. Information technology's of import to notation that your engine parts list lookup typically requires the complete Model number and six grapheme Type number. (Example: 12H702-0505-E1)

In society to view the right Illustrated Parts List and decide the part numbers for your specific engine, you volition need the engine type, model number and code number.